日女人逼,日韩av免费在线观看,AV小网站,奶水孕妇挤胸喷奶水AV

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

rack cylinder Sold to Angola

Release time:2023-11-13 11:19:26 Hits: Current position: Home > News

This article mainly introduces:

Angola hydraulic cylinder,rack cylinder manufacturer,rack cylinder

Angola rack cylinder

(Angola rack cylinder,produced by Hengyu Group)

rack cylinder are widely used in Angola,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed rack cylinder for customers from Angola.

Introduction to rack cylinder:

The advantages and disadvantages of the rack cylinder: the surface of the rack cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the rack cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

When the rack cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the rack cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

rack cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

How the cavitation of the rack cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the rack cylinder, resulting in corrosive damage to the parts.

Answers to some questions about rack cylinder:

How to repair if hydraulic shears cylinder oil leakage?
The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.

What is the reason for the hydraulic cylinder sticking out and not retracting?
There are two reasons: First, the problem with the seal, if there are two seals on the piston, the top seal is broken. Second, when the hydraulic pressure itself is designed, the rod cavity area is too small, so that the desired return force can not be achieved during the return trip. You can first check whether the coupling is damaged; Then see if the relief valve in the oil line block is blocked. If the use time is too long, it needs to be cleaned, the hydraulic oil is very dirty and can block oil block. Electromagnetic directional valves can also be checked, but the chance of problems is relatively small, unless there is a product problem.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
亚洲人人| 一区二区三区久久久| 欧美黄片久久久| 九九久久玖玖| 91在线综合网| 色欲一区二区三区四区五区| 玩弄老熟女xxx偷| 成都涩爱AV| 欧美综合 一区二区| 国产福利一区二区三区| 欧美呦呦网络| 亚洲精选av| 九七影院| 怡红院久久| 亚洲小说图片视频| 国产精品久久久区三区天天噜| 超碰个人| 高清午夜成人日韩在线观看| 日韩欧美黄片区| 久久精品视频首页| 国产一区91| 美丽人妻被按摩中出中文字幕| 96国产视频| 九九精品| 精品国产99久久久久久影视99| 国产精品一区二区三| 欧美嫩| www.cs-chem.cn| 色哟哟亚洲综合| 伊人久久中文| 亚洲国产成在人网站天堂| 欧美日韩一区二区在线观看| 欧美伊人| 久久久精品综合| 欧美国产日韩综合| 亚洲欧美色图| 久久毛片精品| 九色无码高清一区| 久草99| 青青草中文字幕| 久热伊人|